Owner's manual

6 7
M12 JSSP
.............................12 V
...............................5 W
..........................0,49 kg
................ 5,0 V / 2,1 A
............... 2402-2480 MHz
..........................8,70 dBm
............... 35 Hz – 20 kHz
................ 55Hz – 16 kHz
.............................10 m
.............................25 h
ENGLISH
TECHNICAL DATA BLUETOOTH SPEAKER
Battery Voltage ............................................................................
Music Power ................................................................................
Weight without packing and battery .............................................
USB output ..................................................................................
Frequency band(s) of Bluetooth ..................................................
Maximum radio-frequency power transmitted in the
frequency band(s)........................................................................
Sound Quality AUX. Input ............................................................
Bluetooth Input ............................................................................
Transmission Range min. ...........................................................
Runtime (4.0Ah) ..........................................................................
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SPEAKER SAFETY WARNINGS
Never disassemble or modify this apparatus in any way.
Do not use this apparatus near water.
Clean only with dry cloth. Certain cleaning agents and solvents
are harmful to plastics and other insulated parts. Keep the
apparatus handle clean, dry and free of oil or grease.
Refer all servicing to qualifi ed service personnel.
Do not install near any heat sources.
No fl ame sources, such as lighted candles, should be placed
on the apparatus.
It shall not be exposed to dripping or splashing and that no
objects fi lled with liquids, such as vases, shall be placed on the
apparatus.
Do not dispose of used battery packs in the household refuse
or by burning them. Milwaukee Distributors off er to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System M12 chargers for charging System M12
battery packs. Do not use battery packs from other systems.
Caution!
Risk of explosion if the battery is replaced by an incorrect type;
- high or low extreme temperatures that a battery can be
subjected to during use, storage or transportation,
- low air pressure at high altitude,
- replacement of a battery with an incorrect type that can
defeat a safeguard (for example in the case of some lithium
battery types),
- disposal of a battery into fi re or a hot oven, or mechanically
crushing or cutting of a battery,
- or leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion or
the leakage of fl ammable liquid or gas,
- or a battery subjected to extremely low air pressure that may
result in an explosion or the leakage of fl ammable liquid or
gas.
Never break open battery packs and chargers and store only in
dry rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case of eye
contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
This appliance is not intended to be
used or cleaned by persons with
reduced physical, sensory or mental
capabilities, or lack of experience or
knowledge, unless they have been
given instructions concerning the
safe use of the appliance by a
person legally responsible for their
safety. They should be supervised
whilst using the appliance. Children
shall not use, clean or play with this
appliance, which when not in use
should be secured out of their reach.
Warning! To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in fl uid or allow a fl uid to fl ow inside them.
Corrosive or conductive fl uids, such as seawater, certain
industrial chemicals, and bleach or bleach containing products,
etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The Bluetooth speaker can play back audio signals from
connected audio devices.
Via USB connection the speaker can charge USB devices.
Do not use this product in any other way as stated for normal
use.
EC-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio
equipment type M12 JSSP is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: http://services.
milwaukeetool.eu.
USB PORT
Devices connected to the USB port are supplied with power.
Any device that uses more than 2,1 A of DC electrical current
will trip a self-resetting function and disable the output.
POWER BUTTON / BLUETOOTH BUTTON
Power On:
Press the button
.
LED turns on.
USB powers on.
Fuel gauge illuminates to show current battery level for 3
seconds.
Bluetooth enters connecting mode and searches for last paired
device.
Power Off :
Press the button .
LED turns off .
USB powers off .
Speaker powers off .
Bluetooth Pairing:
Press and hold the button
for 3 seconds. LED light will
fl ash to indicate speaker is in pairing mode.
Select "M12 Speaker" on the Bluetooth capable device
- Speaker plays connected tone.
- LED light stays illuminated.
Bluetooth Connecting:
When device is turned on and no AUX cable is plugged in.
ENGLISH
Speaker will default to Bluetooth mode and begin connecting.
LED light will fl ash.
When speaker locates bluetooth device:
- Speaker plays connected tone.
- LED light stays illumincated.
Loss of Bluetooth connection:
If connection between speaker and bluetooth device is lost,
speaker will immediatly try to reconnect to bluetooth device.
LED light will fl ash
Bluetooth Connecting to a diff erent device:
Press and hold the button
for 3 seconds until the LED
light fl ashes. It will then be in pair mode and can be connected
to a diff erent device.
VOLUME BUTTON + / -
Volume increase - press button +.
Volume decrease - press button -.
AUX IN
When 3.5 mm AUX cable is plugged in speaker input will
automactically switch to Aux in. When AUX cable is unplugged
speaker will change back to Bluetooth mode. LED indicator
light remains on.
TROUBLESHOOTING
Problem Cause & Solution
Speaker does not turn
on
LVP (Low Voltage Protection)
protection or may need to be charged
Speaker does not
connect with mobile
device
Turn off Bluetooth on your mobile
device and turn it back on. Then try to
pairing again
Move the mobile device closer to the
speaker and away from interference
or obstructions
Try to pairing another mobile device
No sound from a
Bluetooth device
Make sure that the speaker power is
on
Make sure that the volume is turned
up on the speaker and on your mobile
device
Move the mobile device closer to the
speaker and away from any
interference or obstructions
Try using a diff erent music app
Try pairing another mobile device
Poor sound quality from
Bluetooth device
Move the mobile device closer to the
speaker and away from any
interference
Try using a diff erent music app.
Try pairing another mobile device
No audio from the AUX
source
Make sure that the connected mobile
device is on and playing
Make sure that the 3.5 mm plug is
fully inserted into the speaker and fully
inserted into the source device
Turn up the volume
Increase the volume level on the AUX
device
Try using diff erent AUX cable
Poor sound quality from
an AUX device
Make sure the audio cable is fi rmly
connected to the AUX IN connector
speaker and source device
Try connecting a diff erent AUX device
BATTERIES
Battery packs which have not been used for some time should
be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance
with local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties
is subject to Dangerous Goods regulations. Transport
preparation and transport are exclusively to be carried out by
appropriately trained persons and the process has to be
accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts.
Should components need to be replaced which have not been
described, please contact one of our Milwaukee service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the ten-digit No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Please read the instructions carefully before
starting the machine.