Operator's Manual

3
FUNCTIONAL DESCRIPTION
1. Laser apertures
2. Laser mode indicator
3.
4. Pivot Bracket
3
4
7
5
1
6
1
5. Micro adjust
6. Fuel gauge
7. Mode button
2
1
1
8
10
9
SPECIFICATIONS
8. Threaded inserts
9. Magnets
10. Nail/Screw hole
Cat. No. ................................................... M12 CPL
Volts............................................................ 12V DC
Battery Type .................................................M12™
Charger Type................................................M12™
Laser............................................................Class 2
Lines Max Power ................................. P
AVG
P:
Points Max Power................................ P
AVG
P:
Pulse Frequency..........................................10 KHz
Pulse Duration Normal Mode ................. T
p
V
Pulse Duration Power Save.................... T
p
V
:DYHOHQJWh.......................................... 510-530 nm
Lines Beam Divergence ................................. 1 rad
Points Beam Divergence .......................... 0.5 mrad
Storage Temp ................................... -20°C to 50°C
:RUNLQJ5DQJH ................................................ 38m
5DQJHZLWK'HWHFWRU ........................................ 50m
Accuracy ............................. ±3.18 mm over 10 mm
Settle Time ......................................... < 3 Seconds
Tripod Mount ..................................1/4"-20, 5/8"-11
Ingress Protection............................................ IP54
,PSDFW5HVLVWDQW ...............................................1 m
5HFRPPHQGHG Ambient
Leveling ............Auto ±°4 side to side, front to back
SYMBOLOGY
Operating Temperature .................. -10°C to 40°C
ASSEMBLY
Volts
Direct Current
/$6(55$',ATION
DO NOT ST$5(,1TO BEAM
&/$66/$6(5352'8&7
Magnets
5HDGRSHUDWRU¶VPDQXDO
WARNING
Recharge only with the charger
-
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
changing or removing accessories.
WARNING
Always remove battery pack before
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
reco
Only use
mmended
accessorie
for thi
s
s tool. Others
may be hazardous.
Power Save
8VH power save mode to extend the battery run
time. Power save mode is indicated by dimmed laser
beams and the Mode indicator pulsing. Visual range
is decreased in power save mode. To turn power save
mode ON or OFF, press and hold Mode button for 3
seconds. The tool will automatically switch to power
save mode if less than 7% of battery charge remains.
5HJXODWRU\&RPSOLDQFH0DUN
5&0 7KLV SURGXFW PHHWV
applicable regulatory
requirements.
Do not dispose of electric
tools together with
household waste material.
Electric tools and electronic
equipment that have
reached the end of their life
must be collected separately
and returned to an
environmentally compatible
recycling facility.
Max. altitude................................................. 2000m
Max. relative air humidity ..................................80%