Operator's Manual

ManualsBrandsMilwaukee ManualsImpact WrenchesM12 FUEL™ 1/2" Stubby Impact Wrench w/ Pin Detent

OPERATOR'S MANUAL

To reduce the risk of injury, user must read and understand operator's manual.

WARNING

Cat. No.

M12 FIW38, M12 FIWF120),:3

0)8(/,03$&7:5(1&+)5,&7,215,1*

0)8(/,03$&7:5(1&+)5,&7,215,1*

0)8(/,03$&7:5(1&+3,1'(7(17

Summary of content (8 pages)

PAGE 1
OPERATOR'S MANUAL Cat. No. M12 FIW38, M12 FIWF12 0 ),:3 0 )8(/ ,03$&7 :5(1&+ )5,&7,21 5,1* 0 )8(/ ,03$&7 :5(1&+ )5,&7,21 5,1* 0 )8(/ ,03$&7 :5(1&+ 3,1 '(7(17 WARNING To reduce the risk of injury, user must read and understand operator's manual.
PAGE 2
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
PAGE 3
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a ¿re. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
PAGE 4
OPERATION Attaching and Removing Accessories 3/8" and 1/2" Friction Ring (Cat. No. M12 FIW38 and M12 FIWF12) 1. Use only the appropriate size Square Drive Sockets. 2. To attach a socket, align the accessory with the anvil and push it ¿rmly over the retaining ring. 3. To remove the accessory, pull the accessory o the anvil. Always remove battery pack before WARNING changing or removing accessories. Only use accessories speci¿cally recommended for this tool. Others may be hazardous.
PAGE 5
Cleaning Starting, Stopping and Controlling Speed These tools may be operated at any speed from 0 to full speed. To start the tool, pull the trigger. NOTE: A LED is turned on when the trigger is pulled. To vary the driving speed, simply increase or decrease pressure on the trigger. The further the trigger is pulled, the greater the speed. To stop the tool, release the trigger and the electric brake stops the tool instantly. Clean dust and debris from vents.
PAGE 6
PAGE 7
PAGE 8
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.