Owner's manual

16 17
START
STOP
Push the switch forward and hold until
tool starts (approx. 0,6 seconds).
If the switch is held on for more than 3
seconds, the tool will shut off .
Startup protection: When switched on,
the machine will not start up after the
battery is inserted again.
0,6 sec
800 min
-1
1350 min
-1
1850 min
-1
2500 min
-1
3150 min
-1
3500 min
-1
1500 min
-1
21 3 4 5 6 A
A - Auto-Controlled Start: Fully press the switch. Saw runs at reduced speeds until blade engages workpiece. The saw speed will
increase automatically to provide the most effi cient cut.
Insulated gripping surface