M18 FCOS230 Original instructions
2 Text section with Technical Data, important Safety and Working Hints and description of Symbols 8 14 9 16 10 13 START STOP 12 18 15 6 2 3
Package Contents M18 COS230 M18 COS230 M18 COS230 Original instructions ȆȡȦIJȩIJȣʌȠ ȠįȘȖȚȫȞ ȤȡȒıȘȢ $OJXSlUDQH NDVXWXVMXKHQG Originalbetriebsanleitung 2ULMLQDO LúOHWPH WDOLPDWÕ Ɉɪɢɝɢɧɚɥɶɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɩɨ ɷɤɫɩɥɭɚɬɚɰɢɢ originale 3ĤYRGQtP QiYRGHP N ȆȡȦIJȩIJȣʌȠ ȠįȘȖȚȫȞ ȤȡȒıȘȢ $OJXSlUDQH NDVXWXVMXKHQG OriginalNotice instructions SRXåtYiQt Ɉɪɢɝɢɧɚɥɧɨ ɪɴɤɨɜɨɞɫɬɜɨ ɡɚ Istruzioni originali Originalbetriebsanleitung 2ULMLQDO LúOHWPH WDOLPDWÕ Ɉɪɢɝɢɧɚɥɶɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɟɤɫɩɥɨɚɬɚɰɢɹ 3{YRGQê QiYRG QD SRXåLWLH ɩɨ ɷɤɫɩɥɭɚɬ
1 1 Remove the battery pack before starting any work on the machine.
78-100 % 55-77 % 33-54 % 10-32 % < 10 % 8 9
10 1 1 2 2 3 3 11
1 START 1 Insulated gripping surface 2 + 2 STOP 3 1 2 12 13
Overload control lamp If overloaded, the control lamp will turn on. Reduce the load until the control lamp turn off. If the load is not reduced, the machine shuts off.
1 4 + 3V CR2032 5 2 6 3 16 7 17
1 2 1 18 2 3 19
4 5 20 21
TECHNICAL DATA Cut-off machine Production code Rated speed D=Cutting disc diameter max. d=Cutting disc hole diameter b=Cutting disc thickness min. / max. Wheel type: reinforced abrasive cutting disc or diamond cutting disc Cutting depth max.
water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention. Warning! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.
26 27
Copyright 2021 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (01.