Owner's manual
2726
M18 FDCPF8 M18 FDCPF10
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this power
tool.
Save all warnings and instructions for future reference.
DRAIN CLEANER SAFETY WARNINGS
Only grasp the rotating cable with gloves recommended
by the manufacturer.
Do not allow the cutter to stop turning while the cable is
turning.
Use latex or rubber gloves inside the gloves
recommended by the manufacturer, goggles, face
shields, protective clothing, and respirator when
chemicals, bacteria or other toxic or infectious
substances are suspected to be in a drain line.
Practice good hygiene. Do not eat or smoke while
handling or operating the tool. After handling or
operating drain cleaning equipment, use hot, soapy
water to wash hands and other body parts exposed to
drain contents.
Only use the drain cleaner for the recommended drain
sizes.
Inspect cable for wear and damage before use.
Do not twist, kink or over bend cables.
Inspect the drain to be cleaned before use.
If needed, place protective covers in the work area.
Make sure cable is fully retracted outside of the drain
cleaner.
Determine if the drain cleaner can be placed within
15 cm of the drain opening. If not, the drain opening will
need to be extended using a similar size pipe and fi
ttings.
Place the drain cleaner at a distance not greater than
15 cm from drain opening.
One person must control both the trigger switch and
cable.
Do not operate the drain cleaner in reverse rotation
except as described in this manual.
Maintain labels and nameplates.
WARNING
TECHNICAL DATA DRAIN CLEANER
Noise/vibration information
Wear ear protectors!
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Warning!
SPECIFIED CONDITIONS OF USE
EC-DECLARATION OF CONFORMITY
BATTERIES
BATTERY PACK PROTECTION LI-ION BATTERY
TRANSPORTING LITHIUM BATTERIES
ADDITIONAL HINTS FOR OPERATION
NOTE: If the tool binds, release the trigger immediately.
To unbind drain cleaner:
ENGLISH ENGLISH