Owner's manual

2020
XII
English
TECHNICAL DATA
Magnetic core drilling machine
M18 FMDP
Production code 4692 83 02...
... 000001-999999
Battery voltage 18 V
No-load speed 400 min
-1
690 min
-1
Lengths of stroke 146 mm
Max. magnetic power 8,89 kN
Spindle receiver 19 mm Weldon
Drill diameter max. with core hole drill bit 38 mm
Drill diameter max. with solid drill bit 13 mm
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ... 12,0 Ah) 13,9 ... 14,5 kg
Recommended Ambient Operating Temperature -18°C ... +50°C
Recommended battery types
M18B..., M18HB...
Recommended charger
M12-18..., M1418 C6
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
82,4 dB(A)
93,4 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value a
h
(Li-Ion 2,0 Ah)
Uncertainty K=
1,69 m/s
2
1,5 m/s
2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,
with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signicantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings, instructions, illustrations and
specications provided with this power tool.Failure to follow
the warnings and instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference.
MAGNETIC CORE DRILLING MACHINE SAFETY
WARNINGS
Always use the protective shields on the machine. Use protective
equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet and
ear defenders.
Never reach into the danger area of the machine when it is running.
Chips and splinters must not be removed while the machine is
running.
Do not use a damaged accessory.
Clamp or otherwise secure the workpiece. To reduce the risk of
injury, do not hold workpiece by hand.
WARNING! Wet connections are shock hazards.
Do not use cutting uid in an overhead or any other position that
allows cutting uid to enter motor or switch enclosure.
WARNING! To reduce the risk of re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in uid or allow a uid to ow inside them.
Corrosive or conductive uids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.