Owner's manual
4646
English
XVI
chemicals, and bleach or bleach containing products, etc., Can cause a
short circuit.
Use only System M18 chargers for charging System M18 battery packs.
Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
WARNING
This device contains a button-type/coin cell lithium battery. A
new or used battery can cause severe internal burns and lead to
death in as little as 2 hours if swallowed or if it enters the body. Always
secure the cover on the battery compartment. If it does not close
securely, stop the device, remove the battery and keep it out of reach of
children. If you believe that someone has swallowed the battery or that
it has otherwise entered the body, seek immediate medical attention.
SPECIFIED CONDITIONS OF USE
Use this circular saw to cut only wood and wood like products.
Never use the Circular table saw to cut materials other than those
specied in the instruction manual.
Stock having a round or irregular cross section (such as rewood) must
not be cut, as it can not be securely held during cutting. When sawing
thin stock layed on edge, a suitable auxilary fence must be used for rm
support.
Rip cutting, cross cutting, mitre cutting and bevel cutting using max.
one mounted saw blade.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible to
completely eliminate certain residual risk factors. The following hazards
may arise in use and the operator should pay special attention to avoid
the following:
- Impairment of hearing, restrict exposure and wear appropriate
hearing protection.
- Measures that can be taken by operator to possibly reduce the eects
of vibration and limit the amount of exposure.
- Health hazards caused by breathing dust developed when sawing
wood, wear a mask if necessary.
MAINTENANCE
Remove the battery pack before starting any adjustment, cleaning and
maintenance work on the device.
Be sure to disconnect the tool from the power supply before attaching
or removing the saw blade.
Remove dust regularly. Remove the sawdust which has accummulated
inside the saw in order to avoid the risk of re.
Replace the table insert when worn
Clean tool and guarding system with dry cloth.
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described, please
contact one of our Milwaukee service agents (see our list of guarantee/
service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label and
order the drawing at your local service agents or directly at: Techtronic
Industries GmbH, Max-Eyth-Straße10, 71364Winnenden, Germany.
ONEKEY™
To learn more about the ONE-KEY functionality of this device, please
refer to the Quick Start guide included with this product or go to http://
www.milwaukeetool.com/one-key
To download the ONE-KEY app, visit the App Store or Google Play from
your smart device.
We considered the result to be within our minimum acceptable perfor-
mance level according to EN 301 489-1/ EN 301 489-17. And we will give
the operation guidance to the customer in user manual.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the
battery pack. Avoid extended exposure to heat or sunshine (risk of
overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after use.Battery packs which have not been used for some time should
be recharged before use.
To obtain the longest possible battery life remove the battery pack from
the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery pack
where the temperature is below 27°C and away from moisture Store the
battery packs in a 30% - 50% charged condition ,Every six months of
storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors oer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash it
o immediately with soap and water. In case of eye contact rinse tho-
roughly for at least 10 minutes and immediately seek medical attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit situations
that cause high current draw, the tool will stop for about 2 seconds and
then the tool will turn OFF. To reset, release the trigger. Under extreme
circumstances, the internal temperatur of the battery could become
to high. If this happens, the battery will shut down. To reset, release
the trigger. Under extreme circumstances, the internal temperatur of
the battery could become to high. If this happens, the battery will shut
down. Place the battery on the charger to charge and reset it.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
The user can transport the batteries by road without further
requirements.
Commercial transport of Lithium-Ion batteries by third parties is subject
to Dangerous Goods regulations. Transport preparation and transport
are exclusively to be carried out by appropriately trained persons and
the process has to be accompanied by corresponding experts.
When transporting batteries:
Ensure that battery contact terminals are protected and insulated to
prevent short circuit. Ensure that battery pack is secured against move-
ment within packaging. Do not transport batteries that are cracked or
leak. Check with forwarding company for further advice