M18 ONEFHIWF1 Original instructions
16 Text section with Technical Data, important Safety and Working Hints and description of Symbols 13 6 11 8 9 STOP 10 12 4 14 2 START 3
1 Remove the battery pack before starting any work on the machine.
1 ! 2 6 7
START Handle (insulated gripping surface) STOP 8 9
LOCK 10 11
Accessory - Not included in standard equipment, available as an accessory.
1 2 3 3V CR2032 + 4 14 15
TECHNICAL DATA CORDLESS IMPACT SCREWDRIVER M18 ONEFHIWF1 Production code...................................................................... ....4672 15 02... ...000001-999999 No-load speed .................................................... ......... 0-950 min-1 Impact range ...................................................... ....... 0-1350 min-1 Torque ................................................................ ............ 530 Nm No-load speed ...............................................
Oil, dirt, rust or other matter on the threads or under the head of the fastener affects the degree of tightness. The torque required to loosen a fastener averages 75% to 80% of the tightening torque, depending on the condition of the contacting surfaces. On light gasket jobs, run each fastener down to a relatively light torque and use a hand torque wrench for final tightening.
Copyright 2021 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (01.