Owner's manual

19ENGLISH
2.14 System update
Before updating a system, go to SETTINGS  ABOUT and make a note of the current fi rmware revisions in the
system.
Firmware updates can be performed with the
WIRELESS MONITOR M18SIM M18 SIM or tablet running the
MILWAUKEE® PIPELINE INSPECTION APP .
1. Turn on both the
CONTROL HUB M18 SISH and WIRELESS MONITOR M18SIM M18 SIM or tablet running the
MILWAUKEE® PIPELINE INSPECTION APP .
2. Check that the WIRELESS MONITOR M18SIM or tablet is connected to the CONTROL HUB M18 SISH by WI-FI. If
it is not connected, you will need to connect it.
3. Insert a Thumb Drive with the fi rmware update on it into the
CONTROL HUB M18 SISH 's USB-A port.
4. Go to SETTINGS  system update
5. Select
CONTROL HUB M18 SISH .
6. The fi lename of the update should be seen in this window.
Choose the fi lename to begin the update.
7. Read and acknowledge the warning message by selecting OK.
SETTINGS
MANAGE JOBS
2019/05/10 6 FILES
DATE & TIME
UNITS
FACTORY RESET
ABOUT
LANGUAGE
SYSTEM UPDATE
Feet
English
SCREEN SETTINGS
SERVICE & SUPPORT
SETTINGS
CONTROL HUB
WIRELESS MONITOR
SETTINGS
MTCam_hub.bin
Selecting OK will run a firmware update in
the Control Hub. Please do not interrupt the
update process after it has started.
Cancel OK