OPERATOR’S MANUAL Cat. no. M18 CH M18 CHX M18™ FUEL™ 26 MM (1”) SDS PLUS ROTARY HAMMERS TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR’S MANUAL.
GENERAL POWER TOOL SAFETY WARNINGS WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Loss of control can cause personal injury. • Hold power tools by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. • Maintain labels and nameplates. These carry important information.
Fig. 1 Drilling Depth Installing drill bits and chisels (M18 CHX) NOTE: Only use accessories with SDS or SDS Plus shanks. Be sure that the shank of the bit is clean. Dirt particles may cause the bit to line up improperly. Do not use bits larger than the maximum recommended capacity of the drill because gear damage or motor overloading may result. For best performance, be sure that the bit is properly sharpened and the shank is lightly greased before use. 1. Ensure the bit holder is positioned in . 2.
ACCESSORIES WARNING Applying greater pressure does not increase the tool’s effectiveness. If the applied working pressure is too high, the shock absorber will be pushed together making the vibrations to the handle noticeably stronger. WARNING Always remove battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.
GENERAL POWER TOOL SAFETY WARNINGS Please refer to the Techtronic Industries Pty. Ltd. Warranty Terms and Conditions for MILWAUKEE® products and accessories which is supplied with the tool or kit. This warranty applies only to product purchased from an authorised MILWAUKEE® dealer in Australia or New Zealand. AUSTRALIA AND NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy Duty®.
