OPERATOR'S MANUAL Cat. No. 0 &6; M18TM FUEL™ sawzall® Reciprocating Saw To reduce the risk of injury, user must read and understand operator's manual.
General POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. attached to a rotating part of the power tool may work area SAFETY result in personal injury.
•When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. •Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Adjusting the Pivot Shoe Installing and Removing Blades from the QuikLok® Blade Clamp Remove battery pack before changing blades. Make sure the spindle and blade clamp areas are clean. Metal chips and sawdust may prevent the Quik-Lok® Blade Clamp from clamping securely. 1. Depending on the job, the blade may be inserted with the teeth facing up or down. To install a blade, slide the release lever up. Insert the blade into the clamp until the tang butts against the collar. Fig.
OPERATION WARNING To reduce the risk of explosion, electric shock and property damage, always check the work area for hidden gas pipes, electrical wires or water pipes when making blind or plunge cuts. WARNING Always remove battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.
MAINTENANCE ACCESSORIES WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs. WARNING Always remove battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.
LIMITED WARRANTY - AUSTRALIA AND NEW ZEALAND Please refer to AUSTRALIAN and NEW ZEALAND warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand.
AUSTRALIA AND NEW ZEALAND MILWAUKEE Service MILWAUKEE prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE dealer or service centre. Milwaukee Electric Tool Corporation 13135 West Lisbon Road, Brookfield, Wisconsin U.S.A.
