OPERATOR'S MANUAL Cat. No. M18 FPD2, M18FDD2 M18™ FUEL™ 13mm DRILL/DRIVER AND HAMMER DRILL/DRIVER WARNING To reduce the risk of injury, user must read and understand operator's manual.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
When battery pack is not in use, keep it away Maintain labels and nameplates. These carry from other metal objects, like paper clips, coins, important information. If unreadable or missing, keys, nails, screws or other small metal objects, contact a MILWAUKEE® service facility for a that can make a connection from one terminal replacement. to another.
FUNCTIONAL DESCRIPTION ; 6 5 Correct : Incorrect 4 8 3 remove battery pack before WARNING Always changing or removing accesso- 7 mended for this tool. Others may be hazardous. 9 Installing Bits Always remove the battery before inserting or removing bits. Select the proper style and size bit for the job. 2 This tool is equipped with a spindle lock. The chuck can be tightened with one hand, creating higher grip 1 strengths on the bit. 10 1.
Selecting Hammer, Drill or Drive Action For forward (clockwise) rotation, push in the control switch from the right side of the tool. Check the direction of rotation before use. For reverse (counterclockwise) rotation, push in the control switch from the left side of the tool. Check direction of rotation before use. To lock the trigger, push the control switch to the centre position. The trigger will not work while the control switch is in the centre locked position.
ACCESSORIES Drilling in Masonry When drilling in masonry, select the hammer drill operating mode. Use high speed carbide-tipped bits. Drilling soft masonry materials such as cinder block requires little pressure. Hard materials like concrete only recommended accessoWARNING Use ries. Others may be hazardous. For a complete listing of accessories, go online to www.milwaukeetools.com.au/ www.milwaukeetools.co.nz or contact a distributor. indicates the proper drilling rate.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
