Operator's Manual

3
SERVICE
SPECIFIC SAFETY RULES FOR
CABLE CUTTER
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the manu
-
facturer or authorized service providers.
WARNING
To reduce the risk of explosion,
Do not use tool without cutting jaws installed.
Fingers could be crushed.
Blade is sharp. Keep hands away from all cutting
edges and moving parts. Laceration and amputation
can occur.
To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool. Material may crack or shatter.
electric shock and property
damage, do not use on live electrical lines.
Tool is NOT insulated. Contact with a live
circuit could result in severe injury or death.
Turn off power before making a cut. Never cut gas
or water lines.
WARNING
Some dust created by power sanding,
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
-
tacts eyes, additionally seek medical help. Liquid
ejected
from
the
battery
may
cause
irritation
or
burns.
Do not use a battery pack or tool that is damaged
-
sion or risk of injury.
-
cessive temperature.
above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
range may damage the battery and increase the risk
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
SYMBOLOGY
Volts
Direct Current
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
WARNING
To reduce the risk of
WARNING
Keep hands away from
all cutting edges and
explosion, electric
shock and property damage, do not
use on live electrical lines. Tool is
NOT insulated. Contact with a live
circuit could result in severe injury or
death. Turn off power before making a
cut. Never cut gas or water lines.
moving parts. Blade is sharp. Laceration
and amputation can occur.
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Read operator's manual.
FUNCTIONAL DESCRIPTION
Maintain labels and nameplates. These carry im
-
portant information. If unreadable or missing, contact
a MILWAUKEE
®
service facility for a free
replacement.
1. Backup release valve
2.
3. Blades
1
6
4
2
3
7
10
5
8
400 mm
2
Cu jaws
11
12
13
4. Socket screws (5 mm)
5. Locking thumb screw
6. Trigger
7. Handle
8. LEDs
9. Hanger
. Hanger
11. ACSR jaws
12. Blade retainer
13. Retaining pin
10
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
9
V
Only cut material specified in this document.
Cutting other materials or sizes will cause the
potential for damage or injury.