OPERATOR'S MANUAL Cat. No. M18 HCC75R M18™ FORCELOGIC™ 75mm (3") UNDERGROUND CABLE CUTTER WITH WIRELESS REMOTE WARNING To reduce the risk of injury, user must read and understand operator's manual.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
BATTERY TOOL USE AND CARE other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paint crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
FUNCTIONAL DESCRIPTION 2 1 3 5 6 4 WARNING recommended for this tool. Others may be hazardous. Blades are sharp. Keep hands away from cutting edge. Laceration can occur. 7 8 9 10 11 12 Changing the Blades Replace the blades when they become chipped or damaged. Always replace blades as a set. Use only 13 ® 15 replacement blade numbers. 1. Pull the trigger to close the blades slightly. The retaining rings must be exposed. 2. Remove the battery pack. 3.
All steps must be completed in order! Once started, steps 1-4 must be completed with no more than 5 minutes between each step. If more than 5 minutes occurs, reset (see step 7) and begin again. OPERATION WARNING To reduce the risk of explosion, electric shock and property damage, do not use on live electrical lines. Tool is NOT insulated. Contact with a live circuit could result in severe injury or death. Turn off power before making a cut. Never cut gas or water lines.
Cutting without Remote ONE-KEY™ Before cutting, ensure blades are properly installed. The tool can be set on the ground or hand held during use. To set the tool on the ground, rotate the cutting head 180° to use the front handle as a To learn more about the ONE-KEY functionality for this tool, please reference the Quick Start guide included with this product or go to milwaukeetools.com.au/ One-Key or milwaukeetools.co.nz/One-key. handles, as shown. Insert the workpiece squarely between the blades.
reduce the risk of personal inWARNING To jury and damage, never immerse your tool, battery pack or charger in liquid or Cleaning Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts.
WARNING ACCESSORIES Use only recommended accessories. Others may be hazardous. For a complete listing of accessories, go online to www.milwaukeetools.com.au/ www.milwaukeetools.co.nz or contact a distributor. WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand.