Operator's Manual

8
ONE-KEY™
WARNING
Chemical Burn Hazard.
This device contains a
lithium button/coin cell battery. A new
or used battery can cause severe in-
ternal burns and lead to death in as
little as 2 hours if swallowed or enters the body.
Always secure the battery cover. If it does not
close securely, stop using the device, remove the
batteries, and keep it away from children. If you
think batteries may have been swallowed or
entered the body, seek immediate medical atten-
tion.
Internal Battery
An internal battery is used to facilitate full ONE-KEY™
functionality.
To replace the battery:
Remote Batteries
Four AAA batteries are used to facilitate full remote
functionality.
NOTE: AAA batteries are not required while con-
nected to the pump.
To replace the batteries:
1. Remove the battery pack.
2. Remove the screw(s)
and open the battery
door.
3. Remove the old bat-
tery, keep it away from
children, and dispose of
it properly.
4. Insert the new battery
(3V CR2032), with the
positive side facing up.
5. Close the battery door
and tighten the screw securely.
WARNING
To reduce the risk of personal in-
1. Remove the battery door screws on the back of
the remote. Remove battery door.
2. Insert four AAA batteries according to the polarity
marked in the battery compartment.
3. Close the battery door and reinsert the screws,
tightening securely.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
Only use hoses and attachments that are single-
acting and rated 10,000 psi (700 bar) or higher.
jury and damage, never immerse
your tool, battery pack or charger in liquid or
Cleaning
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and charger
to the nearest service centre.
NOTE: Wrap the pump in plastic before shipping.
WARRANTY - AUSTRALIA and NEW ZEALAND
SERVICE - AUSTRALIA and NEW ZEALAND
MILWAUKEE
®
prides itself in producing a premium quality product that is Nothing But Heavy Duty
®
.
Your satisfaction with our products is very important to us! If you encounter any problems with the
operation of this tool, please contact your authorised MILWAUKEE
®
dealer.
For a list of MILWAUKEE
®
dealers, guarantee or service agents please contact MILWAUKEE
®
Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 645 928)
or visit milwaukeetool.com.au / milwaukeetool.co.nz.
Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to
product sold in Australia and New Zealand.
961013187-01(A)
Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
21 Kelletts Road, Rowville, VIC 3178
Melbourne, Australia
Milwaukee Tool (New Zealand)
Designed by Milwaukee Electric Tool Corp.
Professionally Made in China for Milwaukee Tool (Australia) / Milwaukee Tool (New Zealand)
Printed in China
274 Church Street, Penrose,
Auckland, 1061, New Zealand
For a complete listing of accessories, go online to
milwaukeetool.com.au / milwaukeetool.co.nz or
contact a distributor.