OPERATOR'S MANUAL Cat. No. M18 ONEPD2 M18 FUEL™ 13 mm (1/2") DRILL/DRIVER AND HAMMER DRILL/DRIVER WITH ONE-KEY™ WARNING To reduce the risk of injury, user must read and understand operator's manual.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
•When battery pack is not in use, keep it away •Always use common sense and be cautious from other metal objects, like paper clips, coins, when using tools. It is not possible to anticipate keys, nails, screws or other small metal objects, every situation that could result in a dangerous outthat can make a connection from one terminal come. Do not use this tool if you do not understand to another.
FUNCTIONAL DESCRIPTION ; 7 6 Correct : Incorrect 5 9 4 remove battery pack before WARNING Always changing or removing accesso- 8 mended for this tool. Others may be hazardous. Installing Bits 10 Always remove the battery before inserting or removing bits. Select the proper style and size bit for the job. This tool is equipped with a spindle lock. The chuck 2 can be tightened with one hand, creating higher grip strengths on the bit. 1 1.
OPERATION reduce the risk of injury, always WARNING To wear safety goggles or glasses Mode Selector with side shields. Selecting Hammer, Drill or Drive Action (Cat. No. M18 ONEPD2) 1. To use the hammer-drilling mode, rotate the torque selector collar until the hammer symbol appears in line with the arrow. Apply pressure to the bit to engage the hammering mechanism. NOTE: When using carbide bits, do not use water to settle dust. Do not attempt to drill through steel reinforcing rods.
reduce the risk of injury, always WARNING To hold or brace securely. Driving Screws and Nut Running Drill a pilot hole when driving screws into thick or hard Set the torque selector collar to the proper Starting, Stopping and Controlling Speed materials. position and set the speed to low. Use the proper 1. To start style and size screwdriver bit for the type of screw the trigger. are using.
Cleaning Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detercombustible solvents around tools. Repairs For repairs, return the tool, battery pack and charger to the nearest service centre.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.