Operator's Manual

3
 Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorised service providers.
SPECIFIC SAFETY RULES

SPECIFICATIONS
Cat. No. ..........................................M18 ONESLDP
Ingress Protection (AC output door closed).....IP54
Ingress Protection (AC output door open)....... IP40
Max Number of Lights in Sequence
......................8
Battery Type .................................................M18™
Charger Type ................................................M18™
...............................................18
Battery Input Amps
..........................................4.5A
81........................................... stloV tuptuO regrahC
Charger Output Amps.........................................3 A
AC Input Volts
............................................ 220-240
AC Input Amps.................................................1.2A
W091...............................................
L DESCRIPTION
1. Handle
2. Control panel
3. Battery power indicator
4. Brightness indicator
5. AC power indicator
6. Power button
7. Decrease brightness button
8. Increase brightness button
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
®
service facility for a
replacement.
ADDITIONAL BATTERY SAFETY RULES
Warning! To reduce the risk of fire, personal injury,
and product damage due to a short circuit, never
immerse your tool, battery pack or charger in fluid or
allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain
industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
10
12
11
13
3
5
4
9
8
6
7
AC Output Volts
......................................... 220-240
AC Output Amps .............................................8.8A
*
AC Input Watts
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
Battery Input Volts
SERVICE
 Have
using only identical replacement parts. This will
ensure that the safety of the light is maintained.
9. Area selector
10. ONE-KEY indicator
11. Battery door locks
12. Battery door
13. Screw holes
14. AC cord
15. AC output
15
14
FUNCTIONA
1
2
SYMBOLOGY
V
Volts
Amps
A
Hz
Hertz
Do not step
Do not stare at the operating light source
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Read operator's manual
Class II, double insulated
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Recommended Ambient
Charging Temperature
.....................
*
5°C to 40°C
(40°F to 105°F)
Reduce AC Output Amps by 1.2A (276W) per
additional light added in sequence.
ADDITIONAL SAFETY RULES
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Caution, risk of electric shock
Direct Current
Alternating Current
Time-lag fuse 3.15A
CAUTION: Do not ingest battery –
Chemical burn hazard
This product contains a coin/button cell
battery. If the coin/button cell battery is
swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Rated
voltage
Rated
capacity
Cell
type
Cell
number
5
18V 2.0 Ah Li-ionM18B2
Type
18V 5.0 Ah Li-ion
M18B6 18V 6.0 Ah Li-ion 2 x 5
2 x 5
2 x 5
M18B9 18V 9.0 Ah
Li-ion 3 x 5
18V 4.0 Ah Li-ionM18B4
M18B5
W0012........................................... sttaW tuptuO CA