Operator's Manual
3
EXTENSION CORDS
Guidelines for Using Extension Cords
• If you are using an extension cord outdoors, be sure
“W” to indicate that it is
acceptable for outdoor use.
• Be sure your extension cord is properly wired and in
good electrical condition. Always replace a damaged
person before using it.
• Protect your extension cords from sharp objects,
excessive heat and damp or wet areas.
READ AND SAVE ALL INSTRUCTIONS
FOR FUTURE USE.
Grounded tools require a three wire extension cord.
As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of
power and possible tool damage.
SYMBOLOGY
Volts
Direct Current
Read operator's manual
Alternating Current
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Class II, double insulated
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
3
FUNCTIONAL
DESCRIPTION
1. Area selector
2. Power
3. Brightness selector
4. Battery bay
7.
AC cord
8.
Handle
4
8
6
9
7
3
1
2
Rafter hook
9.
10. Security cable
(not shown)
SPECIFICATIONS
Cat. No. ..........................................M18 ONESLSP
Ingress Protection......
Battery Type .................................................M18™
Charger Type ................................................M18™
DC Input Volts......................................................18
DC Input Amps ...................................................2.8
AC Input Volts .............................................220-240
AC Input Amps ...................................................0.25
IP54 (AC output door closed)
IP40 (AC output door open)
AC Output Volts ..........................................220-240
AC Output Amps..............................................9.75*
*Reduce AC Output Amps by 1A per additional light
added in sequence
6. ONE-KEY indicator
5
5. AC Output
Do not stare at the operating light
source.
ADDITIONAL BATTERY
SAFETY RULES
WARNING
To reduce the risk of
fire, personal injury,
and product damage due to a short circuit, never
immerse your tool, battery pack or charger in
fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.