OPERATOR’S MANUAL Cat. No. M18 RC M18™ Radio/Charger WARNING To reduce the risk of injury, user must read and understand operator's manual.
IMPORTANT SAFETY INSTRUCTIONS 19) Use battery operated radio only with specifically designated battery packs. Use of any other batteries may create a risk of re. 20) When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a re.
1) AVOID DANGEROUS ENVIRONMENTS. Do 41) Danger of explosion if battery is incorrectly not charge battery pack in rain, snow, damp or replaced. Replace only with the same or equivawet locations. Do not use battery pack or charger lent type.
FUNCTIONAL DESCRIPTION 1. Auxiliary compartment latch 3 2 1 2. Display 3. On/Off/Volume control 4 8 4. PRESET button 5. MODE button 9 5 6. Bluetooth button 7. Play/Pause button 8. EQ button 10 6 9. CLOCK button 10. Seek/adjust buttons 11. Charger indicators* 12. Antenna 13. Bottle opener 7 14. Battery bay 11 15. Charging contacts 16. Battery bay cover 17. Nameplate (on bottom) 18. Cord 19. Cord wrap 20. Auxiliary compartment 21. Backup-battery compartment (not shown) 22.
Inserting/Removing Battery Pack 1. Open the battery bay cover. 2. To insert the battery pack, slide it into the battery bay. 3. To remove the battery pack, pull the battery pack off of the bay. 4. Always close the battery bay cover when the bay is not in use. EXTENSION CORDS Double insulated tools toolscan canuseuse three wire Double insulated either a two or extension As the distance from thefrom supply three wire cord. extension cord.
PRESET Stations To set the PRESET stations: 1. Tune to desired station. 2. Press and hold the PRESET button until the PRESET indicator on the display begins to Àash. 3. Use the Ż and Ź buttons to select the PRESET location for the station. Five locations (1-5) are available. 4. Press the PRESET button to save the location. To tune to a PRESET station: Press and release the PRESET button to step through the PRESET stations. Using the Stereo AUX Jack 1. Open the Auxiliary Compartment 2.
CHARGER OPERATION Charge only MILWAUKEE® M18™ Lithium-Ion battery packs in the MILWAUKEE® Li-Ion Battery Charger. Other types of batteries may cause personal injury and damage. Battery pack and charger are not compatible with V™-technology or NiCd systems. WARNING When to Charge MILWAUKEE® Li-Ion Battery Packs Remove the battery pack from the tool for charging when convenient for you and your job. MILWAUKEE ® battery packs do not develop a "memory" when charged after only a partial discharge.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.