Operator's Manual

2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING Read and understand all
instructions. When using electric appliances, basic
precautions should always be followed, including
the following:
• Before using, read this operator’s manual, your
battery pack and charger operator’s manual, and
all labels on the battery pack, charger and light.
Learn your light’s applications and limitations as well
as potential hazards associated with this type of tool.
• Read and understand all the instructions before
using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Warning - The lens may get hot during use. To reduce
the risk of burns, do not touch hot lens.
• Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
• Do not use outdoors.
• Batteries must be recharged only with the charger
specied by the manufacturer. A charger that may be
suitable for one type of battery may create a risk of re
when used with another battery.
• Use light only with specically designated battery
pack. Use of any other batteries may create a risk of re.
• When battery pack is not in use, keep it away from
metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns,
or a re.
• Maintain labels and nameplates. These carry impor-
tant information. If unreadable or missing, contact a
MILWAUKEE
®
service facility for a free replacement.
SAVE THESE
INSTRUCTIONS
SYMBOLOGY
SPECIFICATIONS
Cat. No. ..................................................M18SAL-0
Volts .............................................................18 DC
Use only MILWAUKEE
®
M18™ Li-Ion battery packs
FUNCTIONAL DESCRIPTION
1. Head
2. Extension poles
3. Extension latches
4. Switch
5. Upper handle
6. Leg release button
7. Legs
8. Carrying handle
9. Battery bay
1
3
4
2
6
8
9
5
7
ASSEMBLY
WARNING Recharge only with
the charger specied for the battery. For specic
charging instructions, read the operator’s manual
supplied with your charger and battery.
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into the
battery bay. Insert the battery pack until the battery
latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack out of the battery bay.
WARNING To reduce the risk of
injury, do not look directly into the light when the
light is on.
To reduce the risk of injury, always fully extend and
lock legs into position before raising the poles.
Light may tip and cause injury.
To reduce the risk of injury, keep hands clear of
the housing area when collapsing the extension
poles. Head may descend rapidly, pinching hands
and ngers.
Extending/Collapsing the Legs
Always extend and lock legs before raising the poles.
1. Stand light upright.
2. Press the Leg Release Button and slide the legs
down using the Carrying Handle.
3. Lift up on the Upper Handle while sliding down the
Carrying Handle.
Volts
Safety alert
Do not stare into the laser beam.
Please read the instructions carefully
before starting the machine.
Waste electrical products should not be
disposed of with household waste. Please
recycle where local authority or
retailer for recycling advice.
Class III protection