Operator's Manual

2
• Read and understand all the instructions before
using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Warning - The lens gets very hot during use. To
reduce the risk of burns, do not touch hot lens.
• Never insert bulbs other than MILWAUKEE
bulbs in the bulb socket. Bulbs other than
MILWAUKEE bulbs may cause short circuit of
battery and personal injury.
• Store idle work light out of reach of children.
Warm work lights can become hazardous in the
hands of children.
• Do not use outdoors.
• For a rechargeable appliance - Use only the char-
ger supplied by the manufacturer to recharge.
• For an appliance with a replaceable lamp - always
unplug or remove battery pack before replacing the
lamp. See "Specications" for replacement bulbs.
• Know your work light. Read this manual carefully
to learn your work light's applications and limitations
IMPORTANT SAFETY INSTRUCTIONS
as well as potential hazards associated with this
type of tool.
• Batteries must be recharged only with the char-
ger specied by the manufacturer. A charger that
may be suitable for one type of battery may create
a risk of re when used with another battery.
• Use work light only with specically designated
battery pack. Use of any other batteries may create
a risk of re.
• When battery pack is not in use, keep it away
from metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause sparks, burns, or a re.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Before using the work light, read this operator's manual, your battery pack and charger operator's manual,
and all labels on the battery pack, charger and work light.
SAVE THESE
INSTRUCTIONS
SPECIFICATIONS
WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. When using
electric appliances, basic precautions should always be followed, including the following:
SYMBOLOGY
1
FUNCTIONAL DESCRIPTION
1. Bezel
assembly
2. On/Off
button
3. Magnet
4. Hook
5. Pivot head
2
4
3
5
5
2
Cat. No. Volts DC Replacement Bulbs For use with Battery Packs:
49-24-0185 28 49-81-0040 48-11-2830 28 V Li-Ion or equivalent
49-24-0187 28 n/a * 48-11-2830 28 V Li-Ion or equivalent
49-24-0171 18 49-81-0030 Use only MILWAUKEE M18™ Li-Ion battery packs.
2735-20 18 n/a * Use only MILWAUKEE M18™ Li-Ion battery packs.
49-24-0145 12 49-81-0020 Use only MILWAUKEE M12™ Li-Ion battery packs.
49-24-0146 12 n/a * Use only MILWAUKEE M12™ Li-Ion battery packs.
ASSEMBLY
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into
the body of the tool. Insert the battery pack until
the battery latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack off of the tool.
WARNING To reduce the
risk of injury, do not look directly into the light
when the work light is on.
WARNING Recharge only
with the charger specied for the battery.
For specic charging instructions, read the
operator’s manual supplied with your charger
and battery.
*LED worklights do not require replacement parts.
Volts
Direct Current
Underwriters Laboratories, Inc.
United States and Canada
Underwriters Laboratories, Inc.