User's Manual

USER MANUAL

IRON HIGH RANGE

MODEL: MW14

ISTMW14 08/10

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our office and the repair will be effected free of charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

SPECIFICATIONS:

MW 14

RANGE 0.00 to 5.00 ppm

RESOLUTION 0.01 ppm

ACCURACY ±0.04 ppm ±2% of reading @ 25 °C

TYPICAL EMC DEV. ±0.01 ppm

LIGHT SOURCE Light Emitting Diode @ 525 nm

LIGHT DETECTOR Silicon Photocell

METHOD Adaptation of the EPA Phenantroline method 315B, for

natural and treated waters. The reaction between iron

and reagent causes an orange tint in the sample.

ENVIRONMENT 0 to 50°C (32 to 122 °F)

max. 95% RH non-condensing

BATTERY TYPE 1 x 1.5V AAA

AUTO-SHUT OFF After 3 minutes of non-use and 2 minutes

after reading

DIMENSIONS 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)

WEIGHT 64 g (2.25 oz.)

OPTIONAL ACCESSORIES:

Reagent Sets

2720416 Iron powder reagent, 25 pcs.

Other Accessories

3000100 Glass cuvettes with caps (2 pcs)

3000200 Tissue fow wiping cuvettes (2 pcs)

3000300 1.5V AAA batteries (4 pcs)

Milwaukee

PAGE 1
Milwaukee WARRANTY: Milwaukee This instrument is warranted from all defects in materials and manufacturing for a period of two years from the date of purchase. If during this period, the repair or replacement of parts is required, where the damage is not due to negligence or erroneous operation by the user, please return the parts to either dealer or our office and the repair will be effected free of charge.
PAGE 2
1. Dust cover • Remove the cuvette, open it and add the content of one packet of 2720416 reagent. Replace the cap and shake gently for 2 minutes until the powder is completely dissolved. Replace the cuvette into the meter. • Wait for 2 minutes and 30 seconds and then press the button or press and hold the button until the timer is displayed on the LCD. • The instrument directly displays the concentration of iodine in ppm. The meter automatically turns off after 2 minutes. 2.