OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Catalog No. No de Cat. Catálogo No. 6016 6017 HEAVY-DUTY ORBITAL FINISHING SANDER EXTRA ROBUSTE PONCEUSES ORBITALES DE FINITION HEAVY-DUTY LIJADORA PARA ACABADOS TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR.
GENERAL SAFETY RULES — FOR ALL POWER TOOLS WARNING! READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-opearted (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2.
SPECIFIC SAFETY RULES 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. 3.
GROUNDING EXTENSION CORDS WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, have it repaired by a MILWAUKEE service facility before use.
TOOL ASSEMBLY WARNING! To reduce the risk of injury, always unplug tool before attaching or removing accessories or making adjustments. Use only specifically recommended accessories. Others may be hazardous. Punch Plate (Cat. No. 6017 only) (Fig. 2) Cat. No. 6017 is equipped with a punch plate which punctures holes in sandpaper. These holes allow dust to be removed from work surface and vacuumed into the dust bag.
OPERATION WARNING! To reduce the risk of injury, wear a dust mask and safety glasses with side shields. Unplug the tool before changing accessories or making adjustments. Selecting Sandpaper and Grits Aluminum oxide, silicon carbide or other synthetic abrasives are recommended for power sanding. A garnet sandpaper is acceptable, but has a short life. Start your work with an abrasive grit just coarse enough to remove high spots and excessive roughness.
MAINTENANCE ACCESSORIES WARNING! To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs. Maintaining Tools Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage.
RÈGLES GÉNÉRALES DE SÉCURITÉ POUR LES OUTILS ÉLECTRIQUE AVERTISSEMENT! LIRE SOIGNEUSEMENT TOUTES LES INSTRUCTIONS Le non respect des instructions ci-après peut entraîner des chocs électriques, des incendies et/ou des blessures graves. Le terme «outil électrique» figurant dans les avertissements ci-dessous renvoie à l’outil électrique à alimentation par le réseau (à cordon) ou par batterie (sans fil). CONSERVER CES INSTRUCTIONS SÉCURITÉ DU LIEU DE TRAVAIL 1. 2. 3.
RÈGLES DE SÉCURITÉ PARTICULIÈRE 1. Tenir l’outil par les surfaces de prise isolées si, au cours des travaux, l’outil de coupe risque d’entrer en contact avec des fils cachés ou avec son propre cordon. Le contact avec un fil sous tension met les parties métalliques exposées de l’outil sous tension, ce qui infligera un choc électrique à l’opérateur. 2. Entretenez les étiquettes et marqies di fabricant. Les indications qu'elles contiennent sont précieuses.
CORDONS DE RALLONGE MISE À LA TERRE AVERTISSEMENT! Si le fil de mise à la terre est incorrectement raccordé, il peut en résulter des risques de choc électrique. Si vous n’êtes pas certain que la prise dont vous vous servez est correctement mise à la terre, faites-la vérifier par un électricien. N’altérez pas la fiche du cordon de l’outil. N’enlevez pas de la fiche, la dent qui sert à la mise à la terre. N’employez pas l’outil si le cordon ou la fiche sont en mauvais état.
MONTAGE DE L'OUTIL AVERTISSEMENT! Pour minimiser les risques de blessures, débranchez toujours l’outil avant d’y faire des réglages, d’y attacher ou d’en enlever les accessoires. L’usage d’accessoires autres que ceux qui sont spécifiquement recommandés pour cet outil peut comporter des risques. Plaque-poinçon (No de cat. 6017) (Fig. 2) La ponceuse No. 6017 est pourvue d’une plaque-poinçon servant à perforer le papier abrasif.
MANIEMENT AVERTISSEMENT! Pour minimiser les risques de blessures, portez des lunettes à coques latérales. Débranchez l’outil avant de changer les accessoires ou d’effectuer des réglages. Ponçage général 1. Pour éviter que la ponceuse ne démarre par soubresauts, placez l’interrupteur ON/OFF à la position “ON” avant de la poser sur la surface à poncer. 2. Poncez lentement en faisant chevaucher vos mouvements dans le sens du grain du bois.
MAINTENANCE ACCESSOIRES AVERTISSEMENT! Pour minimiser les risques de blessures, débranchez toujours l’outil avant d’y effectuer des travaux de maintenance. Ne faites pas vous-même le démontage de l’outil ni le rebobinage du système électrique. Consultez un centre de service MILWAUKEE accrédité pour toutes les réparations. Entretien de l’outil Gardez l’outil en bon état en adoptant un programme d’entretien ponctuel. Avant de vous en servir, examinez son état en général.
REGLAS DE SEGURIDAD GENERALES PARA HERRAMIENTAS ELÉCTRICAS ¡ADVERTENCIA! LEA TODAS LAS INSTRUCCIONES Si no se siguen todas las siguientes instrucciones se puede provocar una descarga eléctrica, un incendio y/o lesiones graves. El término “herramienta eléctrica” en todas las advertencias incluidas más abajo se refiere a su herramienta operada por conexión (cable) a la red eléctrica o por medio de una batería (inalámbrica). GUA0RDE ESTAS INSTRUCCIONES SEGURIDAD EN EL ÁREA DE TRABAJO 1. 2. 3.
REGLAS ESPECIFICAS DE SEGURIDAD 1. Agarre la herramienta por los asideros aislados cuando realice una operación en la que la herramienta de corte pueda entrar en contacto con cables ocultos o con su propio cable. El contacto con un cable “con corriente” hará que las partes de metal expuesto de la herramienta pasen la corriente y produzcan una descarga al operador. 2. Guarde las etiquetas y placas de especificaciones. Estas tienen información importante.
TIERRA EXTENSIÓNES ELÉCTRICAS ¡ADVERTENCIA! Puede haber riesgo de descarga eléctrica si se conecta el cable de conexión de puesta a tierra incorrectamente. Consulte con un electricista certificado si tiene dudas respecto a la conexión de puesta a tierra del tomacorriente. No modifique el enchufe que se proporciona con la herramienta. Nunca retire la clavija de conexión de puesta a tierra del enchufe. No use la herramienta si el cable o el enchufe está dañado.
ENSAMBAJE DE LA HERRAMIENTA ¡ADVERTENCIA! Para reducir el riesgo de lesiones, desconecte siempre la herramienta antes de fijar o retirar accesorios, o antes de efectuar ajustes. Utilice sólo los accesorios específicamente recomendados. El uso de otros accesorios puede ser peligroso. Plato perforador (Cat. No. 6017) (Fig. 2) El Cat. No. 6017 está equipado con un plato perforador que permite hacerle las perforaciones necesarias al papel de lija.
OPERACION ¡ADVERTENCIA! Remoción de pinturas y barniz 1. Si se van a usar removedores líquidos o pistolas de calor para acelerar el trabajo, asegúrese que la superficie esté fría y seca. Antes de operar la lijadora, remueva el material sobrante con un cuchillo o espátula. 2. Use granos ásperos, abiertos, para evitar que se “tape” la superficie de la lija. Selección de la hoja de lija y su tipo de grano 3.
MANTENIMIENTO ACCESORIOS ¡ADVERTENCIA! ¡ADVERTENCIA! Para reducir el riesgo de lesiones, desconecte siempre la herramienta antes de darle cualquier mantenimiento. Nunca desarme la herramienta ni trate de hacer modificaciones en el sistema eléctrico de la misma. Acuda siempre a un Centro de Servicio MILWAUKEE para TODAS las reparaciones. Mantenimiento de las herramientas Adopte un programa regular de mantenimiento y mantenga su herramienta en buenas condiciones.
UNITED STATES CANADA MILWAUKEE Service Service MILWAUKEE MILWAUKEE prides itself in producing a premium quality product that is NOTHING BUT HEAVY DUTY®. Your satisfaction with our products is very important to us! MILWAUKEE est fier de proposer un produit de première qualité NOTHING BUT HEAVY DUTY®. Votre satisfaction est ce qui compte le plus! En cas de problèmes d’utilisation de l’outil ou pour localiser le centre de service/ventes ou le centre d’entretien le plus proche, appelez le...