Owner's manual

DE
Deutsch
99
English
GB
WARNING!
Read all safety warnings, instructions, illustrations and
specications provided with this power tool. Failure to
follow all instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
SANDER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Appliances used at many dierent locations including wet room
and open air must be connected via a residual current device (FI,
RCD, PRCD) of 30mA or less.
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is rec-
ommended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
Always disconnect the plug from the socket before carrying out
any work on the machine.
Make sure the machine is switched o before plugging in.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Use a dust absorption system and
wear a suitable dust protection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g.
asbestos).
This machine is suitable only for dry sanding.
TECHNICAL DATA
Oscillating sander
SPS 140
220-240 V
Production code 4470 16 04...
4470 26 04......
000001-999999
Frequency 50/60 Hz
Power input 1,2 A
Rated input 260 W
No-load speed 14 700 min
-1
Orbital travel diameter 1,6 mm
Dimensions of grinding plate 113 x 105 mm
Weight according EPTA-Procedure 01/2014 1,6 kg
Recommended Ambient Operating Temperature -18°C ... +50°C
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
79,5 dB (A)
90,5 dB (A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value a
h
Uncertainty K=
8,0 m/s
2
1,5 m/s
2
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for dierent
applications, with dierent accessories or poorly maintained, the vibration and noise emission may dier. This may signicantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o or when
it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.