Specifications

- 1.4 -
Configuration and function
The Front
Name Function
1 Front cover It is opened when setting media or taking a corrective measure against a
media jam. Even if the power switch is off, keep the front cover closed.
2 Carriage Moves the print head from side to side.
3 Operation panel This panel has the operation keys required for operating the device and
the LCD for displaying set items, etc.
4 Capping station Incorporates the ink cap to be capped on the head and the wiper, etc.
5 Clamp lever It is made to go up-down the pinch roller for holding media.
6 Heater operation panel Provides the heater power switch and the heater status LED indicator.
7 Power switch It turns on/off the power to the device.
When the power switch is turned on, the POWER indicator lights in
green. While the main power switch is on, the ink clogging preventive
operation is performed periodically even if the power switch is off.
(Flashing)
8Waste ink tank Waste ink gathers in this tank.
9 Stand It supports the main unit. It is provided with casters that are used to
move the device.
10 Take-up device It supports to wind up the roll media printed.
11 Drier fan unit * Dries plotted ink.
12 Front exhauster * Discharges plotting smell from the media to out of the room.
13 Printer heater Fixes and dries printing ink. ( Attached inside the platen )
14 Platen It puts out the media as it is plotted on. Inside the platen, two heaters is
including.
1
2
3
4
5
6
7
8
9
10
11 *
12 *
13
14
* This drawing illustrates fan
unit set to the plotter. As for
JV3-75SPII, this unit is option.