Specifications

- 5.4 -
Cleaning the station interior [STATION]-[CARRIAGEout]
Move the carriage when cleaning the station interior and replacing the consumable parts.
•Do not move the carriage out of the capping station by hand.
Select the [STATION]-[CARRIAGEout] to move the carriage.
For the [STATION] function, there are two following items.
CARRIAGEout : Move the carriage for maintenance of the station interior.
WIPER EXCHANGE : When the message [REPLACE WIPER] is displayed, replace the
wiper. page 5.5.
NOZZLE WASH : Clean the nozzle using the cleaning kit. page 3.8
Disway WASH : Wash the ink discharge way. page 5.7
CUSTODY wash : Wash the head nozzle and ink discharge way to store the
printer. page 5.9
STEPS:
1. Select the [STATION].
page 5.2.
2. Press the [ENTER] key.
3. Select [CARRIAGEout], and then carriage
moves out.
4. Open the front cover, then perform the follow-
ing maintenance works for the station interior.
1. Cleaning the ink caps
Remove ink with a cotton swab from the rubber mounted around the cap. page 3.4.
2. Cleaning the wiper
Take out the wiper and then wipe out ink with cotton buds. page 3.4.
3. Cleaning the wiper cover
Wipe off ink to the ceiling of the wiper cover using cotton buds. page 3.4.
4. Replacing the cutter blade
The cutter blade is a consumable part. When the cutter blade has become blunt, replace it with a
new one.
page 5.29
STATION
MENT : CARRIAGEout
<MAINTENANCE
STATION < ent >