Specifications

CHAPTER 4 Daily Maintenance When the operation of the printer is to be suspended for a long time
4-18
12Open the maintenance cover, and fill the caps with the cleaning solution using a
dropper.
Since the printer performs idle suction operation intermittently, repeat this work several times to clean the ink
discharge passage. Perform this operation with all the caps.
13Close the maintenance cover and press the [ENTER] key.
The heads return to the station and after performing the initial operation, the printer returns to LOCAL mode.
Ink cap
PRE PRT AFT
35°C 40°C 50°C
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
NOT POW-OFF !!
PLEASE WAIT