Specifications

CHAPTER 5 In Case of Trouble Troubles for which error messages are displayed
5-22
∗∗∗∗ ERROR 210 ∗∗∗∗
INTERLOCK SENSOR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeaterTEMP(--/--/--)
An abnormal temperature of the media
heater was detected.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 211 ∗∗∗∗
HeadWARM.TEMP.(----)
An abnormal temperature of the head
heater was detected.
∗∗∗∗ ERROR 212 ∗∗∗∗
WASTE INKtank SENSOR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 250 ∗∗∗∗
Y COORDINATES
An error was detected during scanning
operation.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 251 ∗∗∗∗
SYSTEM ERROR
A system error occurred.
Error message Cause Remedy