Specifications

2-27
CHAPTER 2 Basic Use of Printer About Function Menus
Setting values in function menus
The menus contain the following functions.
SET UP functions
Function name Sub function Setting value Function
MEDIA COMP. (p. 3-34) -255 to 255 Corrects the feed rate of media.
MediaFeed
SETUP (p. 6-5)
FEED METHOD DIRECT, NORMAL Switches between methods for
detecting the feed rate of media.
SPEED SWITCHING 200% to 10% Sets the media feed rate.
MOVEMENT TEST Performs testing whether or not the
media is compatible with the direct
detection method using the media
encoder.
HEATER
(p. 3-22)
(p. 6-29)
SET TEMP. Pre-heater OFF, 20 to 60 °C
(OFF, 68 to 140 °F)
Sets heater conditions.
Print heater OFF, 20 to 60 °C
(OFF, 68 to 140 °F)
After-heater OFF, 20 to 70 °C
(OFF, 68 to 158 °F)
SET TIME STANDBY (NONE, 0- 90 min / In steps of 10
minutes)
OFF TIME (NONE, 0 - 90 min / In steps of 10
minutes)
PRINT MODE
(p. 6-6)
FINE quality STD., FINE, FAST Sets a print quality level and printing
direction.
DRAFT quality STD., FINE, FAST
SCAN DIRECTION Uni-D
Bi-D
LOGICAL SEEK ON, OFF
INK LAYERS (p. 6-8) 1 to 9 Sets the number of layers in which
ink is to be applied.
DRYING TIME
(p. 6-8)
SCAN 0.0 to 19.9 sec. Sets the time to wait for ink drying.
Draw.END 0 to 999 sec.
AUTO CUT (p. 6-9) ON, OFF Cuts the media automatically after
printing.
PRE-FEED (p. 6-9) ON, OFF Feeds the media back and forth
before printing.
MARGIN (p. 6-9) -10 to 85 mm Sets a non-printing area along the
right and left edges of the media.
COLOR PATTERN (p. 6-9) ON, OFF Prints a color pattern for nozzle
missing check near the right edge of
the media.
REFRESH (p. 6-10) LEVEL 0 to 3 Refreshes the print heads during
printing.
VACUUM (p. 6-10) STRONG, STANDARD, Little
WEAK, WEAK, OFF
Sets the absorbability of the media.
PRIORITY
(p. 6-10)
ALL HOST Sets the priority of settings (host /
panel).
ALL PANEL
INDIVIDUALLY MEDIA COMP., HEATER, PRINT
MODE, INK LAYERS, DRYING
TIME, AUTO CUT, PRE-FEED,
MARGIN, COLOR PATTERN,
REFRESH, VACUUM, MEDIA
FD.SPEED, MediaFD.METHOD