Specifications

CHAPTER 2 Basic Use of Printer About Function Menus
2-30
PG DROP
ADJUST.
(p. 3-36)
PATTERN 1 to 8 -40.0 to 40.0 dot Set the reference value for correct-
ing the misalignment of the ink fall
points between outward trip and
homeward trip in bi-directional
printing when the head gap has been
changed.
SLEEP SET UP REFRESH
(p. 4-30)
REFRESHinter-
val
OFF, 1 to 168 h While the power switch is off, the
printer performs refreshing opera-
tion at fixed intervals to prevent ink
clogging or the like.
Set the interval (in hours) at which
refreshing operation that discharges
ink from the heads is to be per-
formed.
TUBE WASH
(p. 4-31)
WAS H I NT E R-
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
pump tube cleaning operation is to
be performed.
CLEANING
(p. 4-32)
CLEAN. INTER-
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
cleaning operation is to be per-
formed.
CLEAN. TYPE Normal, Soft, Hard Set a type of cleaning.
ROUTINE SETUP
ROUTINE WIP-
ING (p. 4-33)
SCAN COUNT 0 to 9990 times With the power turned on, the
printer performs various operations
at fixed intervals to prevent such
trouble as nozzle clogging, nozzle
missing, ink drops falling or ink
spraying. Set the number of times
scanning can be performed before
the nozzle surface wiping operation
is to be performed to remove con-
densation.
TEMP.difference 1 to 60°C (In units having been set
by [MACHINE SET] function)
Set the value of a difference in tem-
perature between the print heater
and the ambient temperature at
which wiping operation is to be per-
formed.
REFRESH
(p. 4-35)
REFRESHinter-
val
OFF, 1 to 168 h Set the interval (in hours) at which
refreshing operation is to be per-
formed.
TUBE WASH
(p. 4-36)
WAS H I NT E R-
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
pump tube cleaning operation is to
be performed.
CLEANING
(p. 4-37)
CLEAN. INTER-
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
cleaning operation is to be per-
formed.
CLEAN. TYPE Normal, Soft, Hard Set a type of cleaning.
WIPER LEVEL (p. 4-39) 10/10 to 1/10 times The wipers are consumables. The
heads can get dirty easily in a dusty
atmosphere.
The heads cannot be cleaned ade-
quately with curled or worn wipers.
This printer gives the wiper replace-
ment warning earlier than standard
depending on the operating environ-
ment. (10/10 = Default)
HEAD SELECT (p. 5-9) [1234]
[123–] , [–234]
[12––] , [–23–] , [––34]
[1–––] , [–2––] , [––3–] , [–––4]
Select the head(s) to be used for
printing.
Any of the combinations of heads
shown at left is available.
Function name Sub function Setting value Function