Specifications

CHAPTER 3 Print Output Selecting and checking printing conditions
3-20
Selecting and checking printing conditions
When the Type 1 to Type 4 printing conditions have already been registered, only selecting an appropriate
Type is required to switch between the settings to meet the desired printing.
How to select a user type
STEPS: (Setting by [FUNCTION] key)
1 Make sure that the printer is in LOCAL mode, and then select [SET UP] using the
[FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select an appropriate one of Type 1 to Type 4 using [] or [], and press the
[ENTER] key.
STEPS: (Setting by [USER TYPE] key)
1 Make sure that the printer is in LOCAL mode, and then press the [USER TYPE] key.
The user type can be changed in the order of 2 → 3 → 4 → 2... by pressing the [USER TYPE] key. It can also
be changed using the [] or [] key.
Press the [ENTER] key to return to LOCAL mode.
 The number in the ( ) following Type represents the current type.
PRE PRT AFT
35°C 40°C 50°C
FUNCTION
SET UP <ENT>
PRE PRT AFT
35°C 40°C 50°C
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
PRE PRT AFT
35°C 40°C 50°C
SET UP
SELECT : TYPE 2
PRE PRT AFT
35°C 40°C 50°C
SET UP
SELECT : TYPE 1
PRE PRT AFT
35°C 40°C 50°C
USER TYPE CHANGE
TYPE (1) −> <2> : ent
PRE PRT AFT
35°C 40°C 50°C
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm