Specifications

3 Printing
3-68
STEPS FOR REPLACEMENT
1 A message [INK NEAR END] or [INK END] appears during printing.
Once [INK NEAR END] appears, the printer returns to LOCAL mode and stops operation every completion of
printing a single image.
Go to Step 2 after a stop of printing.
Once [INK END] appears, printing cannot be continued.
When replacement of a cartridge is required during printing, replace the cartridge for which the cartridge LED
(red) is lit or flashing. Take care not to remove the cartridge for which the cartridge LED (green) is lit; remov-
ing it would discontinue printing.
2 Replace the ink cartridge with a new one.
Pull out the ink cartridge of the indicated color and then set a new ink cartridge.
3 Set the printer in REMOTE mode.
Printing of the remaining images can be resumed.
 When a cartridge LED (red) is lit or flashing, replace the cartridge immediately.
Never remove any cartridge if there is no cartridge to be installed in place of the
cartridge to be removed. If any cartridge is kept removed without another one
installed instead of the removed one, the ink supply path will dry, thus resulting
in a malfunction of the printer. If ten minutes have passed with any cartridge
removed and without another one installed, the printer will warn the operator
by sounding the warning buzzer.
The replacement procedure described below is applied to a case where an error
has occurred in both cartridges.
[INK END][INK NEAR END]
R. 1 > [JV5-01]
INK END MCYKKYCM
R. 1 > [JV5-01]
INK Near END MCYKKYCM