Specifications

5 In Case of Trouble
5-24
∗∗∗∗ ERROR 160 ∗∗∗∗
NCU DETECT 02
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
∗∗∗∗ ERROR 160 ∗∗∗∗
NCU DETECT 03
An error occurred in the control sys-
tem.
Printing can be resumed after turning
off the nozzle missing detection func-
tion. Turn on the nozzle missing detec-
tion function again before starting to
print the next and subsequent print
files.
If the error occurs frequently, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 160 ∗∗∗∗
NCU DETECT 04
An error occurred in the control sys-
tem.
∗∗∗∗ ERROR 161 ∗∗∗∗
NCU EXCHANGE
An error occurred in the control sys-
tem.
Operation can be resumed.
If the error occurs frequently, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 161 ∗∗∗∗
NCU CONSUMPTION
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
Operation can be resumed after turning
off the nozzle missing detection func-
tion.
∗∗∗∗ ERROR 162 ∗∗∗∗
NCU LINE VOLTAGE
An error occurred in the control sys-
tem.
∗∗∗∗ ERROR 163 ∗∗∗∗
NCU SENSOR
An error occurred in the control sys-
tem.
Operation can be resumed.
If the error occurs frequently, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 163 ∗∗∗∗
NCU SENSOR DETECT
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
Operation can be resumed after turning
off the nozzle missing detection func-
tion.
∗∗∗∗ ERROR 164 ∗∗∗∗
NCU FPGA ERROR
An error occurred in the control sys-
tem.
∗∗∗∗ ERROR 200 ∗∗∗∗
HEAD MEMORY (----)
An error occurred in the circuit board
system.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 201 ∗∗∗∗
BACKUP MEMORY
An error occurred in the circuit board
system.
∗∗∗∗ ERROR 201 ∗∗∗∗
BACKUP DATA
An error occurred in back-up data. The continued use is possible.
If the error message appears fre-
quently, please call for services.
∗∗∗∗ ERROR 202 ∗∗∗∗
DEVICE CONSTRUCTION
An error occurred in the control sys-
tem.
Contact your local distributor to call
for service.
Press the [ENTER] key to display the
details of the error. Press the [ENTER]
key again to enable the system to be
started after changing the configura-
tion to a supported one. (See 5-13)
Error message Cause Remedy