Specifications

2-11
Operation to set function menus
Setting values in function menus
The menus contain the following functions.
SET UP functions
Function name Sub function Setting value Function
MEDIA FEED
(Refer to P.6-4 in
this manual.)
COMPENSATION -255 to 255 Draws a pattern to compensate the
feeding amount of the media and
compensates.
SPEED SWITCHING 200% to 10% Sets the media feed rate.
HEATER
(Refer to P.6-28 in
this manual.)
SET TEMP. Pre-heater OFF, 20 to 60 °C
(OFF, 68 to 140 °F)
Sets heater conditions.
Post-heater OFF, 20 to 70 °C
(OFF, 68 to 158 °F)
SET TIME STANDBY (NONE, 0- 90 min / In steps of 10
minutes)
OFF TIME (NONE, 0 - 90 min / In steps of 10
minutes)
PRINT MODE
(Refer to P.6-4 in
this manual.)
FINE quality STD., FINE, FAST Sets a print quality level and printing
direction.
DRAFT quality STD., FINE, FAST
SCAN DIRECTION Uni-D
Bi-D
LOGICAL SEEK ON, OFF
INK LAYERS (Refer to P.6-6 in this manual.) 1 to 9 Sets the number of layers in which
ink is to be applied.
DRYING TIME
(Refer to P.6-6 in
this manual.)
SCAN 0.0 to 19.9 sec. Sets the time to wait for ink drying.
Draw.END 0 to 999 sec.
PRE-FEED (Refer to P.6-7 in this manual.) ON, OFF Feeds the media back and forth
before printing.
MARGIN (Refer to P.6-7 in this manual.) -20 to 75 mm Sets a non-printing area along the
right and left edges of the media.
COLOR PATTERN (Refer to P.6-8 in this manual.) Right edge : ON, OFF
Left edge : ONx1 to ONx5, OFF
Draws a color pattern on both edges
of the media.
REFRESH (Refer to P.6-8 in this manual.) LEVEL 0 to 3 Refreshes the print heads during
printing.
DRYNESS FAN (Refer to P.6-8 in this manual.) STRONG, STANDARD, Little
WEAK, WEAK, OFF
Sets the strength of the dryness fan
to dehydrate ink struck through the
media.
PRIORITY
(Refer to P.6-9 in
this manual.)
ALL HOST Sets the priority of settings (host /
panel).
ALL PANEL
INDIVIDUALLY MEDIA COMP., HEATER, PRINT
MODE, INK LAYERS, DRYING
TIME, PRE-FEED, MARGIN,
COLOR PATTERN, REFRESH,
FD.SPEED
AUTO CLEAN-
ING
(Refer to P.6-9 in
this manual.)
ON
Press [FUNC-
TION] key to set
items on the right.
CLEANING
INTERVAL
10 to 30000 mm Cleans the print heads automatically
every completion of printing.
CLEANING
TYPE
SOFT, NORMAL, HARD
OFF