Specifications

4 Daily Maintenance
4-2
Routine Maintenance
Notes on cleaning solution
Use the cleaning liquid dedicated for the ink being used.
Cleaning of platen sheet metal/platen sheet metal holder
Wipe dust on the platen sheet metal with soft brush, dry cloth or paper towel.
If ink blot adheres to the platen sheet metal, wipe it with paper towel immersed in cleaning liquid for main-
tenance.
Cleaning the media sensor (2 places)
Remove ink blot or dust adhering to the sensor surface with a cotton swab.
Sublimation transfer ink Cleaning Liquid Bottle Kit A29 (SPC-0137) [Sold separately]
Water-based Cleaning Liquid Cartridge (SPC-0259) [Sold separately]
 When cleaning, if you wish to move the platen sheet metal on the machine, check that
there is no ink adhering to the platen sheet metal. If there is ink blot, wipe it off.
 Wipe softly the platen sheet metal when cleaning so that it may not be broken or bent.
 When moving the platen sheet metal, hold rectangular holes (on two positions) at the
same time.
Platen sheet metal holder B
Platen sheet metal holder A
Platen sheet metal