Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
5-2
Check first when a trouble occurred
When a trouble occurred, check the followings. If the trouble is not solved after checking, contact a distribu-
tor in your district or our office.
The power is not turned on
It causes for improper connection of the power cable or the computer cable. Check that the cables are
properly connected.
Data is not drawn
It occurs when the data is not sent to this machine properly.
Message appears
When [WATER NOT READY] appears on the display, the water temperature in the water heater has
notreached the predetermined value. If [UV NOT READY] is displayed, as the UV lamp has not been ready,
theUV lamp can not be used, therefore drawing can not be started.
Is the power cable connected to this
machine and to the outlet?
Securely connect the power cable to them.
Yes
Is the emergency stop switch pressed? Release the emergency stop switch.
Is the correct interface cable used? Use the cable exclusive for this machine.
Is the interface cable securely connected
in position?
Securely connect the interface cable in
position.
Yes
Is the message of the ink run-out shown
on the display?
Replace the ink cartridge with a new one.
P. 4- 4
Printing is disabled before the tempera-
ture reaches the predetermined value.
Wait until the temperature reaches the
predetermined value. When it has
reached, the message disappears and
drawing becomes available.
No
Yes
No
No
Yes
No