Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
5-9
Troubles displaying messages
5
In Case of Trouble
Message Solution
• Turn the power of this machine off and turn it on after a while.
• If the same error message appears again, contact a distributor in your
district or our office to call for service.
• Remove an obstacle on the table.
• Turn the power of this machine off and turn it on after a while.
• If the same error message appears again, contact a distributor in your
district or our office to call for service.
• Check the switch of UV power is turned on.
• Turn the power of this machine off and turn it on after a while.
• If the same error message appears again, contact a distributor in your
district or our office to call for service.
ERROR 50
WIDTH
ERROR 51
YORIGIN
ERROR 53
WI PER ORG
ERROR 53
WP UN I T ORG
ERROR 54
MED I A JAM
ERROR 71
WAT E R T NK T H E RM I S T O R
ERROR 71
WAT E R H T R T H E RM I S T O R
ERROR 71
WATER HEATER TEMP
ERROR 71
ABNORMAL WATER ROUTE
ERROR 73
WAT E R H E AD T EMP
ERROR 73
SCAN HEAD TEMP
ERROR 73
HEAD TEMP [ FFF ]
ERROR 74
UV POWER OF F
ERROR 74
UV POWER NG
ERROR 75
UV LAMP NG
ERROR 75
UV SHTTER NG
ERROR 90
FROM CLEAR
ERROR 92
FROM WR I TE
ERROR 96
CHECK : SDRAM