Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
1-9
1
Before Use
Connecting the cables
Connecting the USB2.0 interface cable
Connect a computer to this machine with the USB2.0 interface cable.
● Notes on peripheral devices in USB high speed mode
When a peripheral device (USB memory or USB HDD) to be operated in USB high speed mode is
connected to the same personal computer that this machine is connected to, the USB device may not be
recognized.
When this machine is connected to the personal computer to an externally installed USB hard disk drive ,
the data output speed to this machine may drop. That can cause the head unit to stop temporarily at the
right or left end during printing.
Connecting the power cable
• Your RIP is required to support USB2.0 interface.
• If USB2.0 interface is not installed in your computer, ask a RIP vender near you or our branch
office.
• Use only the supplied power cable.
• Be sure to connect the power cable plug to the grounded outlet, or it may cause fire or electric
shock.
• Take care not to damage, break or work upon the power cable. Or if putting a heavy thing on,
heating, or pulling the power cable, the power cable can break to cause fire or electric shocks.
Connect
USB cable