Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
In this chapter, the procedure from media preparation to drawing
are explained.
Operation flow ....................................................... 2-2
Turning the power ON/OFF................................... 2-4
Turning the power ON ............................................... 2-4
Maintenance operation at startup .............................. 2-6
Turning the power OFF ............................................. 2-8
Preventing nozzle dropout while power-off ................ 2-9
Setting media....................................................... 2-11
Changing the height of the table .............................. 2-12
Test drawing ........................................................ 2-13
Head cleaning ...................................................... 2-14
Cleaning by Normal ................................................. 2-14
Cleaning by Hard ..................................................... 2-15
Cleaning by Wiping .................................................. 2-16
Cleaning by Hard2 ................................................... 2-17
Drawing an image from data .............................. 2-18
Starting the drawing ................................................. 2-18
Cancelling the drawing ............................................ 2-19
When drawing stops ................................................ 2-19
Use the Copy Function ............................................ 2-20
Subtank Maintenance .............................................. 2-20
About covers ............................................................ 2-21
CHAPTER 2
Basic Operations