Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
2-6
Maintenance operation at startup
When the power on maintenance is valid, the operation below is performed depending on the status at
startup of this machine.
For the power on maintenance setting, refer to
P.4-18 "Perform cleaning automatically when the power
supply is turned on".
If hot water turned cool
1
Preparation for hot water starts.
• If you wish to cancel cleaning, press the
key.
If you press the
key, cleaning is cancelled
and the screen becomes <LOCAL> display.
2
When water becomes hot enough,
cleaning starts automatically.
• When the cleaning is completed, <LOCAL> is displayed
If “ERROR149” occurred at the previous startup
If “ERROR149 INK UPSTREAM GRD” occurred at the previous startup, perform the operation below.
1
Perform wiping to remove ink drop on
the nozzle surface.
• When the wiping is completed, <LOCAL> is displayed
POWER ON MA I NTENANCE
NOT READY WAT ER
POWER ON MA I NTENANCE
CANCEL : e n t
END
ENTER
CLEAN I NG ACT I VE
*****---------------
WI P I NG
PLEASE WA I T