Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
Turning the power ON/OFF
2-10
When turning the power OFF
● Do not turn the main power switch OFF.
If the main power switch is ON, the power periodically turns on and the nozzle dropout prevention function
is operated.
If the main power switch is OFF, the sleep function does not work and this may cause nozzle dropout.
● Turn the power OFF after confirming the head position.
If the emergency stop switch is pressed or the main power supply switch is turned OFF, the head may stop
at the position other than the waiting position.
Turning the power off when the head does not return to the position in readiness (the left side) may dry the
head and may cause nozzle clogging.
In this case, turn the power ON again, confirm that the head has returned to the position in readiness (the
left side), then turn the power OFF.
● Do not turn the power OFF in drawing.
The head may not return to the position in readiness (the left side).
● Before turning the main power OFF, turn the front power switch OFF.
When turning the main power switch off to move this machine or to solve an error, be sure to press the
power switch on the front, confirm that the power is off, then turn the main power switch OFF.