Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
2-13
2
Basic Operations
Test drawing
Make test drawing to check blur or missing caused by nozzle clogging.
1
When <LOCAL> is displayed, press the
key.
2
Select [NOZZLE CHECK] with the or
key , and press the key.
3
Test drawing starts.
4
Test drawing ends.
• <LOCAL> is displayed.
5
Check the drawing.
• When the drawing is normal, data can be printed.
• When the drawing is abnormal, execute head cleaning. ( P.2-14)
• When needed, adjust the origin position. ( P.3-2)
• When the following message is displayed, it cannot print. Start drawing after the message has
disappeared.
“WATER NOT READY” ：The water temperature in the water heating device has not
reached the predetermined value.
Check before starting
test drawing
• Is media set ?
( P.2-11)
• Is the origin position set ?
(P.3-2)
• Is the head gap value registered? ( P.3-16)
• Is the checking method of the gap adjustment set?
(P.3-4)
• Is the gap checked? ( P.3-5)
Normal pattern
Abnormal pattern
Many lines are missing
Some lines are missing
in places
Space between lines is
closed or doubled
<LOCAL . 1>
TEST DRAW
NOZ Z L E CHECK < ENT >
ENTER
** TEST DRAW **