Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix

2-14
Head cleaning
If test pattern is not normal, execute head cleaning. There are 3 types of head cleaning.
Cleaning by Normal
1
When <LOCAL> is dipslayed, press the
key.
2
Select [normal] with the key,
and press the key.
3
Select execution of cleaning for each
head.
(1) Select the head with the key.
(2) Select execution of cleaning with the key.
• Select execution of cleaning for the all heads.
Execute cleaning :The ink cartridge color
being set is displayed.
Not execute cleaning: “ * ” is displayed
4
Press the key.
• Cleaning starts.
• When the cleaning is completed, <LOCAL> is displayed.
5
Execute the test drawing, and check the pattern. (
P.2-13)
• Repeat cleaning and test drawing until the drawn pattern becomes normal.
Normal Select this when there is a dozen line missed on the test pattern.
P.2-14
Wiping
Select this when there are several lines missed on the test pattern.
The wiper wipes.
P.2-16
Hard
At the end of daily work, clean the head with washing liquid not to cure the
mist adhered to the nozzle, and then perform this.
It is recommended to perform this at the end of daily work, before turning the
power OFF.
P.2-15
Hard2
When discharging ink with hard cleaning, flushing is executed at the same
time. Select this when nozzle dropout is not solved.
P.2-17
<LOCAL . 1>
CLEANING
CLEAN I NG
TYPE : no rma l
ENTER
CLEAN I NG
COLOR : MM
C
CYYKKWWSS
CLEAN I NG
COLOR : MM
*
CYYKKWWSS
ENTER