Specifications

2-16
Cleaning by Wiping
1
When <LOCAL> is dipslayed, press the
key.
2
Select [wiping] with the key,
and press the key.
3
Select execution of cleaning for each
head.
(1) Select the head with the key.
(2) Select execution of cleaning with the key.
• Select execution of cleaning for the all heads.
Execute Cleaning ：The ink cartridge color
being set is displayed.
Not Execute Cleaning： “ * ” is displayed.
4
Press the key.
5
Select the number of wiping (1 to 9)
with the key.
6
Press the key.
• Cleaning starts.
• When the cleaning is completed, <LOCAL> is displayed.
7
Execute the test drawing, and check the pattern. ( P.2-13)
• Repeat cleaning and test drawing until the drawn pattern becomes normal.
• When the print quality is not improved after repeating head cleaning, clean the wiper and the
cap. See P.4-26 "Wiper cleaning".
• If the print quality is not improved after cleaning the wiper and repeating the head cleaning,
execute subtank maintenance. See P.4-25.
<LOCAL . 1>
CLEANING
CLEAN I NG
TYPE :wiping
ENTER
CLEAN I NG
COLOR : MM
C CYYKKWWSS
CLEAN I NG
COLOR : MM
* CYYKKWWSS
ENTER
CLEAN I NG
Wi pe NUM. : 1
ENTER