Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
2-18
Drawing an image from data
Starting the drawing
1
Set a media ( P.2-11).
2
When <Local> is displayed, press the
key.
• Remote will be displayed and then the machine can receive the data from the computer.
3
Send a drawing data from the
computer.
• Drawing conditions are displayed.
• As for the sending way of data, see the operation
manual of the software used.
4
Drawing starts.
• The print origin is not changed after drawing.
5
Take out the media after drawing.
• Be sure to setup the appropriate air-moving system in case of using the device in a closed
room or a room with bad ventilation.
• If the UV irradiation device is not ready or the temperature of the water heating system has not
reached the predetermined value, a message is displayed. Drawing is not allowed in such
cases. When the display is disappeared, drawing can be started.
• Data can be sent even if both errors are displayed. Drawing starts after the errors are
disappeared.
• If you perform drawing with the hot water temperature
not reaching a certain temperature, the right message is
displayed on the screen. When you press the
key, drawing starts, however, the image quality may be
degraded.
*REMOTE. 1*
REMOTE
*REMOTE. 1*
1200X1200
HOS T / 1 6 / U / H
Resolution: 1200DPI
HOST is set on priority: “HOST” appears.
PLOT is set on priority:
Print quality (STD/FINE/FAST) appears.
Scanninng speed
N:Standard
H:Double speed
Scan direction
U:Unidirectional
B:Bidirectional
Number of passes
WA T E R T EMP NO T R E A D Y
PR I NT START : e n t
ENTER