Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
3-4
Adjusting head gap
Selecting for head gap adjustment
Select the check method for gap adjustment during printing based on the head gap valueentered. There are
two check methods available. Select the check method to be usedaccording to the media to be used.
Sense mode : Select this mode when the thickness of media varies forprinting operations. The
head gap is adjusted for data andcopy printing.
Continue mode : It is on the right front side of this machine. Normally, use this switch to turn the
power ON/OFF.
When the power is ON, the power switch lights in green, and when it is OFF, the
light is out.
1
When <LOCAL> is displayed, press the
key.
2
Select [GAP CHECK] with the
key, and press the key.
3
Select [CHECK SELECT] with the
key, and press the key.
4
Select mode with the key, and
press the key.
• Mode ： continue, sense
5
Press the key to finish.
<LOCAL . 1>
FUNCTION
FUNCT I ON
GAP CHECKC <ENT >
ENTER
GAP CHECK
CHECK SELECT <e n t >
ENTER
CHECK SELEC
:CONTINUE
ENTER
END