Specifications

3-22
Sets the cooling time per scan
When you print on the media that will be deformed by heat of the UV lamp, set the machine so that the
media will be cooled per scan.
1
When <LOCAL> is displayed, press the
key.
2
Press the key.
3
Select the type 1 to 4 with the
key, and press the key.
4
Select the [COOLONG TIME] with the
key, and press the
key.
5
Set the cooling time with the
key, and press the key.
• Setting Value: 0.0 to 2.0s
6
Press the key to finish.
• Please do not store combustible materials near the flushing BOX.
<LOCAL . 1>
FUNCTION
FUNCT I ON
SET UP <ENT>
ENTER
SET UP
SELECT : TYPE1
ENTER
[1]
COOL I NG T I ME < e n t >
ENTER
[1]COOLING TIME
SET UP : 0 . 0 s
ENTER
END