Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix

3-24
Turning OFF the UV lamp
Selecting for head gap adjustment
The UV irradiation device automatically goes OFF when no printing is carried out 30 min-utes or more.
When printing is to be carried out with a long interval, the UV lamp can be setOFF to make the UV lamp
service life longer. When printing restarts, the UV irradiationdevice automatically restarts and the UV lamp
goes ON.
1
When <LOCAL> is displayed, press the
key.
2
Select [LAMP OFF] with the
key, and press the key.
3
Press the key.
• Turning OFF operation of the UV lamp starts.
4
After the lamp is turned OFF and when
the screen on the right is displayed,
press the key to finish.
• You can set time until the UV lamp is turned OFF. ( P.3-25)
• No printing is to be carried out long time (30 minutes or more), set the UV lampOFF.
• Once the UV lamp is set OFF, it takes approximately 10 minutes to turn theUV lamp ON and
make printing enabled.
<LOCAL . 1>
UV
UV LAMP
LAMP OFF <en t >
ENTER
UV LAMP OFF
START : en t
ENTER
UV LAMP OFF
CMP L E T ED
END