User guide
Chapter4: mimioStudioSettings
mimioStudioSettingsisa menuofoptionsforsettingandcustomizingtheproperties andcharacteristicsof
your mimio system, sessions and documents, including Pen settings, Capture Devices, Software Updates,
InteractiveMode,NetMeetinglinks,andmimioNotebookfiles.
4.1. Adjustingpensettings
Thepensettingsdialogallowsyoutochangethewidthandcolorassignmentofallthemimiohardwarepens.
These settings will then be used for the hardware pens (mimioStylus with Expo marker)in Ink Recording
mode.Apreviewpanewilldynamicallydisplaythestrokeappearanceforeachpenaccording
totheselected
settings.Youmusthaveamimiodeviceattachedtoyoursystemtochangepensettings.
Figure4‐1:PenoptionswithintheSettingsdialog
4.2. Adjustingdevicesettings
Youmustbeinthemimio Studio Settingsdialogtoadjustdeviceoptions.FromDevicesyoucanconfigure
the Device Mounting orientation of one or more capture devices and the Surface Size of the whiteboard
beingusedcanbesetinthesoftware(Error!Referencesourcenotfound.).
Select the mimio capture device you
wish to configure using theʺDeviceʺ dropdown list.If you only have
one device then it is selected by default.Up to four mimio capture devices can be connected to the same
computer.Notethatthesoftwaredetectsandidentifieseachattachedmimiodevicebyitsserialnumber.
Surface Size‐to
adjust the surface area covered by your mimio capture device. Not all devices support
variable surface sizes.Surface Size can be set manually by selecting the Width and Height or use “Auto
Size”tosetyourwhiteboardsizebytouchinginthelowerrighthandcorneroftheactualboard
withoneof
themimioStylusPens.
Mounting Style‐adjust the mounting orientation of your mimio capture device to Vertical for landscape
oriented whiteboards or Horizontal for portrait oriented whiteboards. Not all devices support variable
mountingstyles.
Quick Start Guide mimio Studio Settings • 4‐7